Park Tool HTR/HTR1B 1.5in Reamer And Facer In Silver

The Park Tool 758.2 will Ream and Face the Head Tubes of bikes that use the onepointfive interface standard

Features

• The 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and Reamer
• Must also be used with the 750 Centring Cone Adaptor to ensure correct alignment
• 1.9516-inch (49.57mm) diameter reamer/2.441-inch (62mm) facer
• Bores a machined surface to a depth of approximately 25mm and then faces the end of the headtube
• Shis terminology: the 758.2 is for ec49 upper and lower Headtubes
• Use with generous quantities of park CF2 Cutting Fluid for best results and prolonged tool life